23% OFF

Build Your Own Custom Dyna 2012-2017 PREWIRED Ape Hangers Handlebar DIY kit

Special Price $721.64 Regular Price $937.20
In stock
SKU
AHP-101-D-PW-2012-2017

The Prewired Kit is the do-it-yourself package with the handlebars completely wired. You have the option to add our patented Plug & Play® connectors (highly recommended) which will result in the cleanest and fastest install making the task much more enjoyable.

(FULL DESCRIPTION AT BOTTOM OF PRODUCT PAGE)

Memorial Day Handlebar Kit Sale

23% OFF the Original Price* of ALL Handlebar Kits

CLICK FOR IMPORTANT DETAILS

Special Offer ends in
days hours min sec

NOTICE: Use the Handlebars carousel below if you want to change the handlebars selected for this kit. Once the handlebars are visible in the slider, click the handlebars to select them.

Your Selection:

CREATE YOUR OWN Custom STANDARD PREWIRED Ape Hanger Kit for Dyna 2012-2017

NOTICE: Fits all 2012-2017 Dynas EXCEPT Fat Bob and Wide Glide.

    You will receive a prewired package that includes:
  • The Handlebars of your choice
  • Handlebars wired for your bike
  • Cables & Brake Lines sized to correct length to fit your bike
  • Your choice of finish Chrome or Black

CORE CHARGE: In 2014 Harley changed up their controls and switches to a much more complicated system design called CAN/BUS. Though it is a much better design for the consumer, it made the price of these components exponentially more expensive than the controls on previous years. Our cost on these is well over $600 per set. In order to keep our prices down like we have in the past, we developed and exchange program. Much like buying a starter at an auto parts store, we will charge you a core charge when you make the purchase, and when you send your existing components back, we refund 100% of the core charge to you. You also have the option of taking these components OFF of your bike and sending them to us for the build and you can avoid the core charge. Outside of that, the price of our kits are the same as years past. Please call or e-mail us if you have more questions about this.

The Prewired Kit is the do-it-yourself package with the handlebars completely wired. You have the option to add our patented Plug & Play® connectors (highly recommended) which will result in the cleanest install and fastest install making the task much more enjoyable. All you have to do is transfer over the brake master cylinder/lever and clutch perch/lever from your old bars to the new ones, SUPER EASY. Once that is done you are ready to install the handlebars.

You will not find a more complete PREWIRED ape hanger package on the internet. This kit includes everything you need to put apes on your bike, except for the labor and the items listed in the Handlebar Installation Kit. We use these same parts to put apes on bikes in our shop, so we definitely know what you need to correctly pull it off. This kit will fit any Harley Davidson Softail model 1990-1995,

Unless you choose a different set of handlebars, you will receive a set of FAT 1 1/4" 16 inch ape hangers with chrome or black handlebar switches already wired internally, and all of the stainless cables in the correct lengths for your specific application. The handle bars reduce in size to 1 inch at the riser clamp and the grip ends to accept stock controls.

  • 16 inch show chrome plated handlebars ( 1 1/4 inch diameter, 35" width, 7.5" pullback, 8" center width, 13" total base width )
  • Wiring Harness uses factory wire colors and factory wire pins to do an OEM installation
  • Motion Pro or Drag Specialties Stainless Braided cables with protective Armor Coat and chrome plated ends. We do have other cable brands available upon request.

TURN SIGNAL NOTICE: Some models come with turn signals mounted on the handlebar controls. If you want to keep your turn signals up on the controls please contact us via E-MAIL or PHONE before placing your order online.

Please take a minute to understand your options for Heated Grips.

  • No, I Do Not Have Heated Grips. Choosing this option, means you do not have heated grips and have no plans to put them on anytime soon. Therefore, we make NO provisions for heated grips.
  • Yes, I want to ADD BLACK Heated Grips.($329.95) By choosing this option, we will install the BLACK OEM Harley heated grips of your choice. You must let us know the SKU or part number you want based on the heated grips available from Harley's website. We will order those grips from Harley and install them into your new bars along with all the other wiring we put in there. We run a pull cord through the bars to make this job easier for you. Please keep in mind that heated grips are NOT Plug & Play® like the rest of our wiring. During your install of the handlebars, you must connect the red wire to a power source like your battery, black wire to a ground, and if the heated grips have an orange wire (some do not), it must be connected to a power source that only turns on with the ignition switch. All this is outlined in the OEM instructions that come with the heated grips. You will find those in the box with your new handlebar kit. Still pretty darn simple.
  • Yes, I want to ADD CHROME Heated Grips.($329.95) By choosing this option, we will install the CHROME OEM Harley heated grips of your choice. You must let us know the SKU or part number you want based on the heated grips available from Harley's website. We will order those grips from Harley and install them into your new bars along with all the other wiring we put in there. We run a pull cord through the bars to make this job easier for you. Please keep in mind that heated grips are NOT Plug & Play® like the rest of our wiring. During your install of the handlebars, you must connect the red wire to a power source like your battery, black wire to a ground, and if the heated grips have an orange wire (some do not), it must be connected to a power source that only turns on with the ignition switch. All this is outlined in the OEM instructions that come with the heated grips. You will find those in the box with your new handlebar kit. Still pretty darn simple.
  • Yes, My Bike Has Heated Grips. Deciding not to purchase new grips means you must extend the wires on your heated grips using the extension wires that come in the handlebar kit. Once you extend the wires, you must pull those wires through the handlebars internally alongside the other wiring we have already put in there for you. once that is done, you can then connect your heated grip wiring to the OEM harness just like before you took it off (Take pictures before taking them off). Again, it is a much easier install if you purchase new heated grips from us. We are good either way.

No more hassle trying to round up the right length cables, we already know what you need. We have put a lot of time and research to compile the database needed to get you the correct parts. Just let us know the year and model of your bike and riser height when you make payment, or you can call us with the info at 1-877-775-HILL

We carry a full line of chrome or black powder coat handlebars and black vinyl or stainless braided cables. If you don't see what you need, call or e-mail us and we can put a custom package together for you.

Make your Handlebar Kit a true plug and play install by adding our Plug & Play® option.(highly recommended)

By selecting this option, we will cut your handlebar harness wires to the length required for your model, crimp on the necessary OEM pins, and install the wires in an OEM connector with the correct pin locations. No hassle trying to cut and solder wires, or blowing fuses because you got the wires backwards. Saves 2-3 hours on your installation time.

NOTICE: Risers CLICK HERE are sold separately; We need to know the size of the risers so we can size the cables appropriately.

NOTICE: Here at HCC, we build each handlebar kit based on your needs and specifications. This process starts once your handlebar kit is ordered and paid. Please allow 7-14 business days for your parts to arrive.

NOTICE: Police models may have to re-pin their connectors to fit our harness with our Plug & Play® option.

NOTICE: If a police model is selected, we DO NOT provide Police model style controls, wiring harnesses, etc. We will provide standard controls without the police buttons.

PLEASE DO NOT TAKE YOUR BIKE APART UNTIL YOU RECEIVE A SHIPPING NOTIFICATION WITH TRACKING INFORMATION FROM US

More Information
Manufacturer Hill Country Custom Cycles
Warranty 1 Year
Write Your Own Review
You're reviewing:Build Your Own Custom Dyna 2012-2017 PREWIRED Ape Hangers Handlebar DIY kit
Your Rating
  • Buy now, pay later without the fees with AFFIRM, the choice is yours
  • DIY Handlebar Kit YouTube Channel