(Call) 877-755-4455

Did you purchase a Handlebar Kit?
CLICK to Choose BONUS ITEMS

You have no items in your shopping cart.

You have no items to compare.

25% OFF

Build Your Own Custom Dyna Wide Glide 2007-2011 BASIC Ape Hangers Handlebar DIY kit

Build Your Own Custom Dyna Wide Glide 2007-2011 BASIC Ape Hangers Handlebar DIY kit

Sku: AHP-101-DWG-B-2007-2011

Set of 1 1/4 inch FAT 16 inch Hill Country Custom's Ape Hangers with all of the cables and brake lines to fit these apes.

(FULL DESCRIPTION AT BOTTOM OF PRODUCT PAGE)

In stock

$529.00

$396.75

Ask a question (1)

Cyber Week Handlebar Kit Sale

25% OFF the Original Price of All Handlebar Kits

CLICK FOR IMPORTANT DETAILS

Special Offer ends in

SELECT YOUR OPTIONS

$529.00

$396.75

  • NOTICE: Use the Handlebars carousel below if you want to change the handlebars selected for this kit. Once the handlebars are visible in the slider, click the handlebars to select them.

    Your Selection:

    Write Your Own Review

    You're reviewing: Build Your Own Custom Dyna Wide Glide 2007-2011 BASIC Ape Hangers Handlebar DIY kit

    How do you rate this product? *

      1star 2star 3star 4star 5star
    Price
    Value
    Quality
    • * Required Fields

    Build Your Own Custom Dyna Wide Glide 2007-2011 BASIC Ape Hangers Handlebar DIY kit

    NOTICE: Fits all 2007-2011 Dyna Wide Glide.

      You will receive a Basic package that includes:
    • The Handlebars of your choice
    • Cables & Brake Lines sized to the correct length to fit your bike
    • Your choice of finish Chrome or Black
    • Wring Extensions to make your wiring fit this kit.

    The BASIC handlebar kit comes with all the cables and wire extensions cut to the correct length to fit your bike. It DOES NOT come prewired, meaning you need to wire the handlebars. It requires soldering the extensions to extend your wiring to fit the handlebars. And it DOES NOT included handlebar switches and controls. You need to remove the switches and controls from your old handlebars and install them on these new bars. The idea for the BASIC package is to save you money by allowing you to do most of the work yourself.

    Chrome or Black 1 1/4 inch FAT 16 inch Ape Hangers with Stainless Steel braided or black throttle cables, clutch cable, front brake line and handlebar wiring extension kit to fit any Harley model 2007-2011. The handle bars reduce in size to 1 inch at the riser clamp to accept stock risers. They also reduce down to 1 inch at the grip ends to accept stock controls. Our bars are pre-drilled with holes larger than other manufacturers to make the job of running the wires through the bars a much easier task. Below are the specs for each size:

    • 12 inch ( 1 1/4 inch diameter, 35 inch width, 8.5 inch pullback )
    • 14 inch ( 1 1/4 inch diameter, 35 inch width, 8.5 inch pullback )
    • 16 inch ( 1 1/4 inch diameter, 36 inch width, 8.5 inch pullback )

    Unless you decide to change the recommended handlebars used in this kit, you will receive a set of 1 1/4 inch FAT 16 inch Hill Country Custom's Ape Hangers with all of the cables and brake lines to fit these apes. All handlebars used in this kit are pre-wired with your choice of chrome or black switches and handlebar controls already assembled. The Plug & Play™ connectors are optional. Just about anyone can install these bars in their garage in about 6-9 hours with the help of a couple buddy's and your favorite ice cold beverage. If you purchase the Plug & Play™ connectors all you have to do is mount the handlebars and change the cables. Having the bars pre-wired and using the Plug & Play™ wiring connections cut the installation time in half, turning a 6-9 hour job into 3-5 hours.

    Handlebar control set includes chrome master cylinder for single or dual disc applications (your choice), chrome switch housings for all models, chrome clutch bracket, chrome handlebar clamps, chrome levers, and chrome mounting hardware.

    The switches come with chrome or black switch caps ( your choice ) already internally installed in the handlebar set you choose. All of the wires are color coded to match your existing wiring harness. Wiring connectors and instructions are included as well. Wiring will look OEM when completed.

    Black Vinyl or Stainless Steel Braided cables come in the correct length for your specific application. They have chrome plated ends and plastic armor coat over the stainless braid to keep from scratching your paint, and to keep the stainless looking good for a long time.

    Make your Handlebar Kit a true plug and play install by adding the Plug & Play™ option.

    By choosing the Plug & Play™ option, we will cut your handlebar harness wires to the length required for your model, crimp on the necessary OEM pins, and install the wires in an OEM connector with the correct pin locations. No hassle trying to cut and solder wires, or blowing fuses because you got the wires backwards. Plus you cut the installation time in half.

      Note:
    • Add $30 for 18 inch or 20 inch apes.
    • Dual front disc models will have to add $65 for the extra brake lines needed.
    • 2007 and later models have a clutch safety switch on the left side hand controls and require a different clutch lever and the installation of a clutch safety switch in the wiring harness. We charge $40 extra to add this.

    No more hassle trying to round up the right length cables, we already know what you need. We have put a lot of time and research to compile the database needed to get you the correct parts. You will not find a more complete ape hanger package on the internet. Just let us know the year and model of your bike and riser height when you make payment, ( you can call us with the info if you like 512-264-7333 ) and we will handle the rest. If you want to know more, call us at the shop 512-264-7333.

    We carry a full line of handlebars and stainless braided cables. If you don't see what you need on this website, call or e-mail us and we can put a custom package together for you.

    NOTICE: Some models come with turn signals mounted on the handlebar controls. Due to the added cost and complexity of these components, they are not included in our kit. We can add the wiring for the turn signals for an additional fee if needed. Most of our customers discard them or mount them to forks and we have brackets available to accommodate this modification. Please call us or enter your request for Turn Signal wiring in the comment section at checkout.

    Here at HCC, we build each handlebar kit based on your needs and specifications. This process starts once your handlebar kit is ordered and paid. Please allow 7-14 business days for your parts to arrive.

    PLEASE DO NOT TAKE YOUR BIKE APART UNTIL YOU RECEIVE A SHIPPING NOTIFICATION WITH TRACKING INFORMATION FROM US

    Additional Information: Build Your Own Custom Dyna Wide Glide 2007-2011 BASIC Ape Hangers Handlebar DIY kit

    Manufacturer Hill Country Custom Cycles
    Global 1 Year

    Write Your Own Review

    You're reviewing: Build Your Own Custom Dyna Wide Glide 2007-2011 BASIC Ape Hangers Handlebar DIY kit

    How do you rate this product? *

      1star 2star 3star 4star 5star
    Price
    Value
    Quality
    • * Required Fields

    Use spaces to separate tags. Use single quotes (') for phrases.

    Product Questions

    Just checking, will you be sending me a tracking number when the order ships?

    Yes, our system is designed to auto-generate a Shipping Confirmation email notice when the shipping label is printed. To avoid our shipping notice going into your junk mail folder, whitelist mail sent from customercare@hillcountrycustomcycles.com.