(Call) 877-755-4455

Did you purchase a Handlebar Kit?
CLICK to Choose BONUS ITEMS

You have no items in your shopping cart.

You have no items to compare.

Build Your Own Custom Road Glide 2015-2019 PREWIRED Ape Hangers Handlebar DIY kit

Sku: AHP-107-RG-PW-2015-2019

Unless you decide to change the default handlebars used in this kit, you will receive a set of 1 1/4 inch 14 inch Hill Country Custom's Ape Hangers with all of the cables and brake lines to fit these apes. All handlebars used in this kit are pre-wired with your choice of chrome or black switches and handlebar controls already assembled.


(FULL DESCRIPTION AT BOTTOM OF PRODUCT PAGE)

In stock

$942.00

$819.95

SELECT YOUR OPTIONS

$942.00

$819.95

  • NOTICE: Use the Handlebars carousel below if you want to change the handlebars selected for this kit. Once the handlebars are visible in the slider, click the handlebars to select them.

    Your Selection:

    Build Your Own Custom Road Glide 2015-2019 PREWIRED Ape Hangers Handlebar DIY kit

    NOTICE: Fits all Road Glide 2015-2019

      You will receive a prewired package that includes:
    • The Handlebars of your choice
    • Handlebars wired for your bike
    • Cables & Brake Lines sized to correct length to fit your bike
    • Your choice of finish Chrome or Black
    • Our Patented Plug & Play™ connectors for the fastest and cleanest install

    The Prewired Kit is the do-it-yourself package with the handlebars completely wired. This kit comes with our patented Plug & Play™ connectors which will result in the fastest install and cleanest install making the task much more enjoyable. All you have to do is remove the switches and controls from your old bars and mount them on these bars. Once that is done you are ready to install the handlebars.

    You will not find a more complete prewired ape hanger package on the internet. This kit includes everything you need to put apes on your bike, except for the labor and the items listed in the Handlebar Installation Kit. We use these same parts to put apes on bikes in our shop, so we definitely know what you need to correctly pull it off. This kit will fit any Harley Davidson Road Glide model 1998-2007.

    Unless you choose a different set of handlebars, you will receive a set of 1 1/4" 14 inch ape hangers with chrome or black handlebar switches already wired internally, and all of the stainless cables in the correct lengths for your specific application. The handle bars reduce in size to 1 inch at the riser clamp and the grip ends to accept stock controls.

    • 14 inch show chrome plated handlebars ( 1 1/4 inch diameter, 35" width, 7.5" pullback, 8" center width, 13" total base width )
    • Wiring Harness uses factory wire colors and factory wire pins to do an OEM installation
    • Wiring diagram included ( But you probably won't need it )
    • Motion Pro or Drag Specialties Stainless Braided cables with protective Armor Coat and chrome plated ends. We do have other cable brands available upon request.

    Note: Some models come with turn signals mounted on the handlebar controls. Due to the added cost and complexity of these components, they are not included in our kit. We can add the wiring for the turn signals for an additional fee if needed. Most of our customers discard them or mount them to forks and we have brackets available to accommodate this modification. Please call us or enter your request for Turn Signal wiring in the comment section at checkout.

    • Dual front disc models will have to add $65 for the extra brake lines needed.
    • 2007 and later models have a clutch safety switch that has to be installed on the left side switches when we do the installation. We charge $40 extra to add this.
    • These Handlebars are 5 1/8 inch total width at the riser clamp area between the 1 1/4 inch tubing.

    No more hassle trying to round up the right length cables, we already know what you need. We have put a lot of time and research to compile the database needed to get you the correct parts. Just let us know the year and model of your bike and riser height you have, or you can call us with the info at 1-877-775-HILL

    We carry a full line of chrome or black powder coat handlebars and black vinyl or stainless braided cables. If you don't see what you need, call or e-mail us and we can put a custom package together for you.

    A true Plug & Play™ install , we will cut your handlebar harness wires to the length required for your model, crimp on the necessary OEM pins, and install the wires in an OEM connector with the correct pin locations. No hassle trying to cut and solder wires, or blowing fuses because you got the wires backwards. Saves 2-3 hours on your installation time.

    NOTICE: Risers CLICK HERE are sold separately; We need to know the size of your risers so we can size the cables correctly.

    NOTICE: Here at HCC, we build each handlebar kit based on your needs and specifications. This process starts once your handlebar kit is ordered and paid. Please allow 7-14 business days for your parts to arrive.

    A new OEM Throttle by Wire or Fly by Wire sensor with one piece wiring harness is installed on all pre-wired and complete kits for 2008 and Newer Touring models.  This will eliminate having a wiring connection inside the handlebar that could cause problems.

      Please take a minute to understand your options for Heated Grips.
    • No, I Do Not Have Heated Grips. Choosing this option, means you do not have heated grips and have no plans to put them on anytime soon. Therefore, we make NO provisions for heated grips.
    • Yes, I want to ADD BLACK Heated Grips.($259.95) By choosing this option, we will install the BLACK OEM Harley heated grips of your choice. You must let us know the SKU or part number you want based on the heated grips available from Harley's website. We will order those grips from Harley and install them into your new bars along with all the other wiring we put in there. We run a pull cord through the bars to make this job easier for you. Please keep in mind that heated grips are not Plug & Play like the rest of our wiring. During your install of the handlebars, you must connect the red wire to a power source like your battery, black wire to a ground, and if the heated grips have an orange wire (some do not), it must be connected to a power source that only turns on with the ignition switch. All this is outlined in the OEM instructions that come with the heated grips. You will find those in the box with your new handlebar kit. Still pretty darn simple.
    • Yes, I want to ADD CHROME Heated Grips.($329.95) By choosing this option, we will install the CHROME OEM Harley heated grips of your choice. You must let us know the SKU or part number you want based on the heated grips available from Harley's website. We will order those grips from Harley and install them into your new bars along with all the other wiring we put in there. We run a pull cord through the bars to make this job easier for you. Please keep in mind that heated grips are not Plug & Play like the rest of our wiring. During your install of the handlebars, you must connect the red wire to a power source like your battery, black wire to a ground, and if the heated grips have an orange wire (some do not), it must be connected to a power source that only turns on with the ignition switch. All this is outlined in the OEM instructions that come with the heated grips. You will find those in the box with your new handlebar kit. Still pretty darn simple.
    • Yes, My Bike Has Heated Grips. Deciding not to purchase new grips means you must extend the wires on your heated grips using the extension wires that come in the handlebar kit. Once you extend the wires, you must pull those wires through the handlebars internally alongside the other wiring we have already put in there for you. once that is done, you can then connect your heated grip wiring to the OEM harness just like before you took it off (Take pictures before taking them off). Again, it is a much easier install if you purchase new heated grips from us. We are good either way.

    Note: Police models may have to re-pin their connectors to fit our harness with the plug & Play option.

    PLEASE DO NOT TAKE YOUR BIKE APART UNTIL YOU RECEIVE A SHIPPING NOTIFICATION WITH TRACKING INFORMATION FROM US

    .

    Additional Information: Build Your Own Custom Road Glide 2015-2019 PREWIRED Ape Hangers Handlebar DIY kit

    Manufacturer Hill Country Custom Cycles
    Global 1 Year

    Customer Reviews

    Overall a great product Review by James

    Quality:
    Price:
    Value:
    Ordered this kit with a set 16” KST Customs Renegade polished stainless bars. Great bars and the wiring and cable kits done by Hill Country are top notch. Took much longer than expected to get the kit after I ordered it but overall great quality. Would suggest anyone ordering get a ship date confirmed and parts availability confirmed before paying. (Posted on 3/16/2018)

    Write Your Own Review

    You're reviewing: Build Your Own Custom Road Glide 2015-2019 PREWIRED Ape Hangers Handlebar DIY kit

    How do you rate this product? *

      1star 2star 3star 4star 5star
    Quality
    Price
    Value
    • * Required Fields

    Use spaces to separate tags. Use single quotes (') for phrases.