(Call) 877-755-4455

Did you purchase a Handlebar Kit?
CLICK to Choose BONUS ITEMS

You have no items in your shopping cart.

You have no items to compare.

Build Your Own Custom Street Glide, Electra Glide, and Ultra Classic 2014-2019 PREWIRED Ape Hangers Handlebar DIY kit

Sku: AHP-107-B-PW-2014-2019

Everything you need in a PREWIRED custom handlebar kit to put Ape Hanger Handlebars on your Street Glide, Electra Glide, and Ultra Classic 2014-2019. Comes with PLUG & PLAY wiring. Choose any brand of handlebars from a wide choice of handlebars.


(FULL DESCRIPTION AT BOTTOM OF PRODUCT PAGE)

In stock

$942.00

$819.95

SELECT YOUR OPTIONS

$942.00

$819.95

  • NOTICE: Use the Handlebars carousel below if you want to change the handlebars selected for this kit. Once the handlebars are visible in the slider, click the handlebars to select them.

    Your Selection:

    Build Your Own Custom Street Glide, Electra Glide, and Ultra Classic 2014-2019 PREWIRED Ape Hangers Handlebar DIY kit

    NOTICE: Fits all Street Glide, Electra Glide, and Ultra Classic 2014-2019

      You will receive a Prewired package that includes:
    • The Handlebars of your choice
    • Cables and Brake Lines sized to correct length to fit your bike
    • Your choice of finish Chrome or Black
    • Our Patented Plug & Play wiring for a fast and clean install.

    The Prewired Kit is the do-it-yourself package with the handlebars completely wired. The Plug & Play™ connectors will result in the fastest and cleanest install making the task much more enjoyable. We also include the One Piece Fly by Wire sensor so it eliminates having a wiring connection inside you handlebars which can cause problems later down the line. All you have to do is remove the switches and controls from your old bars and mount them on these bars. Once that is done you are ready to install the handlebars kit.

    .

    This package includes everything you need to put apes on your Street Glide, Electra Glide, or Ultra Classic, except for the labor and the items listed in the Handlebar Installation Kit.

    Unless you decide to change the recommended handlebars used in this kit, you will receive a set of 1 1/4 inch FAT 14 inch Hill Country Custom Cycles' ape hangers with all of the stainless cables and brake lines to fit these apes.

    Stainless Steel Braided cables come in the correct length for your specific application. They have chrome plated ends and Armor Coat over the stainless braid to keep from scratching your paint, and to keep the stainless looking good for a long time.

    ABS models only require brake line replacement from the master cylinder to the ABS block. We have the stainless lower line kit available, if you prefer.

    A new OEM Throttle by Wire or Fly by Wire sensor with one piece wiring harness is installed on all pre-wired and complete kits for 2008 and Newer Touring models.  This will eliminate having a wiring connection inside the handlebar that could cause problems.

      Please take a minute to understand your options for Heated Grips.
    • No, I Do Not Have Heated Grips. Choosing this option, means you do not have heated grips and have no plans to put them on anytime soon. Therefore, we make NO provisions for heated grips.
    • Yes, I want to ADD BLACK Heated Grips.($259.95) By choosing this option, we will install the BLACK OEM Harley heated grips of your choice. You must let us know the SKU or part number you want based on the heated grips available from Harley's website. We will order those grips from Harley and install them into your new bars along with all the other wiring we put in there. We run a pull cord through the bars to make this job easier for you. Please keep in mind that heated grips are not Plug & Play like the rest of our wiring. During your install of the handlebars, you must connect the red wire to a power source like your battery, black wire to a ground, and if the heated grips have an orange wire (some do not), it must be connected to a power source that only turns on with the ignition switch. All this is outlined in the OEM instructions that come with the heated grips. You will find those in the box with your new handlebar kit. Still pretty darn simple.
    • Yes, I want to ADD CHROME Heated Grips.($329.95) By choosing this option, we will install the CHROME OEM Harley heated grips of your choice. You must let us know the SKU or part number you want based on the heated grips available from Harley's website. We will order those grips from Harley and install them into your new bars along with all the other wiring we put in there. We run a pull cord through the bars to make this job easier for you. Please keep in mind that heated grips are not Plug & Play like the rest of our wiring. During your install of the handlebars, you must connect the red wire to a power source like your battery, black wire to a ground, and if the heated grips have an orange wire (some do not), it must be connected to a power source that only turns on with the ignition switch. All this is outlined in the OEM instructions that come with the heated grips. You will find those in the box with your new handlebar kit. Still pretty darn simple.
    • Yes, My Bike Has Heated Grips. Deciding not to purchase new grips means you must extend the wires on your heated grips using the extension wires that come in the handlebar kit. Once you extend the wires, you must pull those wires through the handlebars internally alongside the other wiring we have already put in there for you. once that is done, you can then connect your heated grip wiring to the OEM harness just like before you took it off (Take pictures before taking them off). Again, it is a much easier install if you purchase new heated grips from us. We are good either way.

    Note: Police models may have to re-pin their connectors to fit our harness with the plug & Play option.

    PLEASE DO NOT TAKE YOUR BIKE APART UNTIL YOU RECEIVE A SHIPPING NOTIFICATION WITH TRACKING INFORMATION FROM US

    Additional Information: Build Your Own Custom Street Glide, Electra Glide, and Ultra Classic 2014-2019 PREWIRED Ape Hangers Handlebar DIY kit

    Manufacturer Hill Country Custom Cycles
    Global 1 Year

    Customer Reviews

    Handlebars Review by Derek

    Quality:
    Price:
    Value:
    The final product I received was what I asked for. I had a problem with receiving the wrong handle bar's then the wrong wiring on the right set. They sent me a connector for the wiring at their own expense. This is my second set if handlebars from them and I will be a returning customer! (Posted on 4/27/2018)

    Prewired ape hanger handlebar kit Review by Chef

    Quality:
    Price:
    Value:
    I put these bars on my 10 streetglide several years ago and when I I got my 18 streetglide I knew right where to go for my bars!! The quality and lack of hassle on the install is well worth the few xtra dollars. (Posted on 3/1/2018)

    18 flhxs 16" l.a choppers twin peaks Review by Kevin

    Quality:
    Price:
    Value:
    Received in a timely manner,great quality,made for a super easy install and they look great on the bike,THANK you. (Posted on 2/24/2018)

    Best purchase Review by Jake

    Quality:
    Price:
    Value:
    I was hesitant to purchase this kit because of the price. Now that I have it on my bike, I couldn't be more happy. It was worth every penny and I suggest anyone trying to put apes on their bike should 100% order form this company. The products are top of the line, there is no cutting corners and everything is done by guy who one can tell are very experienced and very knowledgeable. I followed along to their YouTube video step by step and was able to complete my intallation by my self with no issues. Once again anyone wanting or thinking whether or not to go this rout, do it! (Posted on 1/28/2018)

    Write Your Own Review

    You're reviewing: Build Your Own Custom Street Glide, Electra Glide, and Ultra Classic 2014-2019 PREWIRED Ape Hangers Handlebar DIY kit

    How do you rate this product? *

      1star 2star 3star 4star 5star
    Quality
    Price
    Value
    • * Required Fields

    Use spaces to separate tags. Use single quotes (') for phrases.