(Call) 877-755-4455

Did you purchase a Handlebar Kit?
CLICK to Choose BONUS ITEMS

You have no items in your shopping cart.

You have no items to compare.

Build Your Own Custom Street Glide, Electra Glide, and Ultra Classic 2008-2013 PREWIRED Ape Hangers Handlebar DIY kit

Sku: AHP-107-B-PW-2008-2013

Everything you need in a PREWIRED custom handlebar kit to put Ape Hanger Handlebars on your Street Glide, Electra Glide, Tri-Glide Trike, Street Glide Trike, or Ultra Classic. Comes with Plug & Play™ wiring. Choose any brand of handlebars from a wide choice of handlebars.


(FULL DESCRIPTION AT BOTTOM OF PRODUCT PAGE)

In stock

$988.00

$790.40

Ask a question (2)

Mardi Gras Handlebar Kit Bonus Sale

20% OFF the Original Price* of all Handlebar Kits

CLICK FOR IMPORTANT DETAILS

Special Offer ends in

SELECT YOUR OPTIONS

$988.00

$790.40

  • NOTICE: Use the Handlebars carousel below if you want to change the handlebars selected for this kit. Once the handlebars are visible in the slider, click the handlebars to select them.

    Your Selection:

    Customer Reviews

    Satisfied customer
    Review by Dark knight
    Quality
    Price
    Value
    Bars were/are great. Easy plug and play. Love that it came with the switches, housings and levers. The cable was the perfect length.
    The gorilla clamp is good. It’s was a bit difficult to get the fairing mount back on due to the off set on the clamp being I little higher than the stick clamp, but I managed.
    New bushings were good -easy install.
    Overall very happy and I would recommend to anyone looking for previews set ups. (Posted on 4/21/2019)
    Exellent quality, super comfortable
    Review by HEMI
    Quality
    Price
    Value
    Buying the prewired was the way to go, you still have a lot of taking apart and putting together to do, but prewired makes the job much easier. Bars look fantastic on bike and are super comfortable, very happy I did it. (Posted on 9/23/2018)
    14" Bagger Bars
    Review by Brent
    Quality
    Price
    Value
    Customer loved these bars and he got lots of compliments, just ordered another set for another customer. Complete kits and prewired are a time saver.
    Thank You HCC (Posted on 6/8/2018)
    Looks Great
    Review by Ken
    Quality
    Price
    Value
    I called in for assistance to ensure I was ordering the right configuration only to find out I had to pay even more because I didn't receive the controls and hadn't apparently orderd them.
    Then we found the mode switch had separated internally so that created extra work to diagnose and the to attempt a repair. I am being sent a new switch but I am hoping we don't have to replace it. At shop rates this will get very expensive.
    I think I will be happy in the end but we have experienced some challanges getting there (Posted on 4/11/2018)

    Write Your Own Review

    You're reviewing: Build Your Own Custom Street Glide, Electra Glide, and Ultra Classic 2008-2013 PREWIRED Ape Hangers Handlebar DIY kit

    How do you rate this product? *

      1star 2star 3star 4star 5star
    Quality
    Price
    Value
    • * Required Fields

    Build Your Own Custom Street Glide, Electra Glide, and Ultra Classic 2008-2013 PREWIRED Ape Hangers Handlebar DIY kit

    NOTICE: Fits all Street Glide, Electra Glide, and Ultra Classic 2008-2013

      You will receive a Prewired package that includes:
    • The Handlebars of your choice
    • Cables and Brake Lines sized to correct length to fit your bike
    • Your choice of finish Chrome or Black
    • Our Patented Plug & Play™ wiring for a fast and clean install.

    The Prewired Kit is the do-it-yourself package with the handlebars completely wired. The Plug & Play™ connectors will save time, result in a cleaner install and make the task much more enjoyable. All you have to do is remove the switches and controls from your old bars and mount them on these bars. Once that is done you are ready to install the handlebars kit.

    .

    This package includes everything you need to put apes on your Street Glide, Electra Glide, or Ultra Classic, except for the labor and the items listed in the Handlebar Installation Kit.

    Unless you decide to change the recommended handlebars used in this kit, you will receive a set of 1 1/4 inch FAT 14 inch Hill Country Custom Cycles' ape hangers with all of the stainless cables and brake lines to fit these apes.

    Stainless Steel Braided cables come in the correct length for your specific application. They have chrome plated ends and Armor Coat over the stainless braid to keep from scratching your paint, and to keep the stainless looking good for a long time.

    ABS models only require brake line replacement from the master cylinder to the ABS block. We have the stainless lower line kit available, if you prefer.

      You will receive a prewired package that includes:
    • The Handlebars of your choice
    • Cables and Brake Lines sized to correct length to fit your bike
    • Your choice of finish Chrome or Black
    • Our Patented Plug & Play™ wiring connectors for a fast and clean install.

    The Prewired Kit is the do-it-yourself package with the handlebars completely wired. The Plug & Play™ connectors will save time, result in a cleaner install and make the task much more enjoyable. All you have to do is remove the switches and controls from your old bars and mount them on these bars. Once that is done you are ready to install the handlebars kit.

    .

    This package includes everything you need to put apes on your Street Glide, Electra Glide, or Ultra Classic, except for the labor and the items listed in the Handlebar Installation Kit.

    Unless you decide to change the recommended handlebars used in this kit, you will receive a set of 1 1/4 inch FAT 14 inch Hill Country Custom Cycles' ape hangers with all of the stainless cables and brake lines to fit these apes.

    Stainless Steel Braided cables come in the correct length for your specific application. They have chrome plated ends and Armor Coat over the stainless braid to keep from scratching your paint, and to keep the stainless looking good for a long time.

    ABS models only require brake line replacement from the master cylinder to the ABS block. We have the stainless lower line kit available, if you prefer.

    A new OEM Throttle by Wire or Fly by Wire sensor with one piece wiring harness is installed on all pre-wired and complete kits for 2008 and Newer Touring models.  This will eliminate having a wiring connection inside the handlebar that could cause problems.

      Please take a minute to understand your options for Heated Grips.
    • No, I Do Not Have Heated Grips. Choosing this option, means you do not have heated grips and have no plans to put them on anytime soon. Therefore, we make NO provisions for heated grips.
    • Yes, I want to ADD BLACK Heated Grips.($259.95) By choosing this option, we will install the BLACK OEM Harley heated grips of your choice. You must let us know the SKU or part number you want based on the heated grips available from Harley's website. We will order those grips from Harley and install them into your new bars along with all the other wiring we put in there. We run a pull cord through the bars to make this job easier for you. Please keep in mind that heated grips are not Plug & Play™ like the rest of our wiring. During your install of the handlebars, you must connect the red wire to a power source like your battery, black wire to a ground, and if the heated grips have an orange wire (some do not), it must be connected to a power source that only turns on with the ignition switch. All this is outlined in the OEM instructions that come with the heated grips. You will find those in the box with your new handlebar kit. Still pretty darn simple.
    • Yes, I want to ADD CHROME Heated Grips.($329.95) By choosing this option, we will install the CHROME OEM Harley heated grips of your choice. You must let us know the SKU or part number you want based on the heated grips available from Harley's website. We will order those grips from Harley and install them into your new bars along with all the other wiring we put in there. We run a pull cord through the bars to make this job easier for you. Please keep in mind that heated grips are not Plug & Play™ like the rest of our wiring. During your install of the handlebars, you must connect the red wire to a power source like your battery, black wire to a ground, and if the heated grips have an orange wire (some do not), it must be connected to a power source that only turns on with the ignition switch. All this is outlined in the OEM instructions that come with the heated grips. You will find those in the box with your new handlebar kit. Still pretty darn simple.
    • Yes, My Bike Has Heated Grips. Deciding not to purchase new grips means you must extend the wires on your heated grips using the extension wires that come in the handlebar kit. Once you extend the wires, you must pull those wires through the handlebars internally alongside the other wiring we have already put in there for you. once that is done, you can then connect your heated grip wiring to the OEM harness just like before you took it off (Take pictures before taking them off). Again, it is a much easier install if you purchase new heated grips from us. We are good either way.

    Note: Police models may have to re-pin their connectors to fit our harness with the Plug & Play™ option.

    PLEASE DO NOT TAKE YOUR BIKE APART UNTIL YOU RECEIVE A SHIPPING NOTIFICATION WITH TRACKING INFORMATION FROM US

    Additional Information: Build Your Own Custom Street Glide, Electra Glide, and Ultra Classic 2008-2013 PREWIRED Ape Hangers Handlebar DIY kit

    Manufacturer Hill Country Custom Cycles
    Global 1 Year

    Customer Reviews

    Satisfied customer Review by Dark knight

    Quality:
    Price:
    Value:
    Bars were/are great. Easy plug and play. Love that it came with the switches, housings and levers. The cable was the perfect length.
    The gorilla clamp is good. It’s was a bit difficult to get the fairing mount back on due to the off set on the clamp being I little higher than the stick clamp, but I managed.
    New bushings were good -easy install.
    Overall very happy and I would recommend to anyone looking for previews set ups. (Posted on 4/21/2019)

    Exellent quality, super comfortable Review by HEMI

    Quality:
    Price:
    Value:
    Buying the prewired was the way to go, you still have a lot of taking apart and putting together to do, but prewired makes the job much easier. Bars look fantastic on bike and are super comfortable, very happy I did it. (Posted on 9/23/2018)

    14" Bagger Bars Review by Brent

    Quality:
    Price:
    Value:
    Customer loved these bars and he got lots of compliments, just ordered another set for another customer. Complete kits and prewired are a time saver.
    Thank You HCC (Posted on 6/8/2018)

    Looks Great Review by Ken

    Quality:
    Price:
    Value:
    I called in for assistance to ensure I was ordering the right configuration only to find out I had to pay even more because I didn't receive the controls and hadn't apparently orderd them.
    Then we found the mode switch had separated internally so that created extra work to diagnose and the to attempt a repair. I am being sent a new switch but I am hoping we don't have to replace it. At shop rates this will get very expensive.
    I think I will be happy in the end but we have experienced some challanges getting there (Posted on 4/11/2018)

    Write Your Own Review

    You're reviewing: Build Your Own Custom Street Glide, Electra Glide, and Ultra Classic 2008-2013 PREWIRED Ape Hangers Handlebar DIY kit

    How do you rate this product? *

      1star 2star 3star 4star 5star
    Quality
    Price
    Value
    • * Required Fields

    Use spaces to separate tags. Use single quotes (') for phrases.

    Product Questions

    Do you only use Harley Davidson heated grips when building your kits or may I choose another brand?

    We currently only use OEM Harley Davidson grips on our kits, as we have had problems with other brands of heated grips in the past.

    Just checking, will you be sending me a tracking number when the order ships?

    Yes, our system is designed to auto-generate a Shipping Confirmation email notice when the shipping label is printed. To avoid our shipping notice going into your junk mail folder, whitelist mail sent from customercare@hillcountrycustomcycles.com.