Build Your Own Custom Street Glide, Electra Glide, and Ultra Classic 2008-2013 COMPLETE Ape Hangers Handlebar DIY kit

Rating:
100% of 100
Special Price $979.95 Regular Price $1,126.00
In stock
SKU
AHP-107-B-C-2008-2013

This package includes all the handlebar parts you need to put apes on your Street Glide, Electra Glide, Tri-Glide Trike, Street Glide Trike, or Ultra Classic.

(FULL DESCRIPTION AT BOTTOM OF PRODUCT PAGE)

NOTICE: Use the Handlebars carousel below if you want to change the handlebars selected for this kit. Once the handlebars are visible in the slider, click the handlebars to select them.

Your Selection:

Build Your Own Custom Street Glide, Electra Glide, and Ultra Classic 2008-2013 COMPLETE Ape Hangers Handlebar DIY kit

NOTICE: Fits all Street Glide, Electra Glide, and Ultra Classic 2008-2013

    You will receive a Complete package that includes:
  • The Handlebars of your choice
  • Handlebars wired for your bike
  • Controls installed for your bike
  • Cables & Brake Lines sized to correct length to fit your bike
  • Your choice of finish Chrome or Black
  • Plug & Play™ wiring for a fast and cleaner install

This package includes everything you need to put apes on your Street Glide, Electra Glide, Tri-Glide Trike, Street Glide Trike, or Ultra Classic, except for the labor and the items listed in the Handlebar Installation Kit. We use these same parts to put apes on bikes in our shop, so we definitely know what you need to pull it off.

Unless you decide to change the recommended handlebars used in this kit, you will receive a set of 1 1/4 inch FAT 14 inch Hill Country Custom Cycles' ape hangers with all of the stainless cables and brake lines to fit these apes. All handlebars used in this kit are Prewired with chrome switches and the connectors are installed on the wires ready for you to plug in. Also included are chrome handlebar controls already assembled. Really all you have to do is mount the handlebars and change the cables. Just about anyone can do this in their garage in about 3-4 hours with the help of a couple buddy's and your favorite ice cold beverage. Having the bars Prewired and using the Plug & Play™ wiring connections results in the fastest and cleanest install cutting the installation time in half, turning a 6-9 hour job into 3-5 hours.

Stainless Steel Braided cables come in the correct length for your specific application. They have chrome plated ends and Armor Coat over the stainless braid to keep from scratching your paint, and to keep the stainless looking good for a long time.

ABS models only require brake line replacement from the master cylinder to the ABS block. We have the stainless lower line kit available, if you prefer.

NOTICE:

Some models come with turn signals mounted on the handlebar controls. Due to the added cost and complexity of these components, they are not included in our kit. We can add the wiring for the turn signals for an additional fee if needed. Most of our customers discard them or mount them to forks and we have brackets available to accommodate this modification. Please call us or enter your request for Turn Signal wiring in the comment section at checkout.

Here at HCC, we build each handlebar kit based on your needs and specifications. This process starts once your handlebar kit is ordered and paid. Please allow 7-14 business days for your parts to arrive.

A new OEM Throttle by Wire or Fly by Wire sensor with one piece wiring harness is installed on all pre-wired and complete kits for 2008 and Newer Touring models.  This will eliminate having a wiring connection inside the handlebar that could cause problems.

    Please take a minute to understand your options for Heated Grips.
  • No, I Do Not Have Heated Grips. Choosing this option, means you do not have heated grips and have no plans to put them on anytime soon. Therefore, we make NO provisions for heated grips.
  • Yes, I want to ADD BLACK Heated Grips.($259.95) By choosing this option, we will install the BLACK OEM Harley heated grips of your choice. You must let us know the SKU or part number you want based on the heated grips available from Harley's website. We will order those grips from Harley and install them into your new bars along with all the other wiring we put in there. We run a pull cord through the bars to make this job easier for you. Please keep in mind that heated grips are not Plug & Play™ like the rest of our wiring. During your install of the handlebars, you must connect the red wire to a power source like your battery, black wire to a ground, and if the heated grips have an orange wire (some do not), it must be connected to a power source that only turns on with the ignition switch. All this is outlined in the OEM instructions that come with the heated grips. You will find those in the box with your new handlebar kit. Still pretty darn simple.
  • Yes, I want to ADD CHROME Heated Grips.($329.95) By choosing this option, we will install the CHROME OEM Harley heated grips of your choice. You must let us know the SKU or part number you want based on the heated grips available from Harley's website. We will order those grips from Harley and install them into your new bars along with all the other wiring we put in there. We run a pull cord through the bars to make this job easier for you. Please keep in mind that heated grips are not Plug & Play™ like the rest of our wiring. During your install of the handlebars, you must connect the red wire to a power source like your battery, black wire to a ground, and if the heated grips have an orange wire (some do not), it must be connected to a power source that only turns on with the ignition switch. All this is outlined in the OEM instructions that come with the heated grips. You will find those in the box with your new handlebar kit. Still pretty darn simple.
  • Yes, My Bike Has Heated Grips. Deciding not to purchase new grips means you must extend the wires on your heated grips using the extension wires that come in the handlebar kit. Once you extend the wires, you must pull those wires through the handlebars internally alongside the other wiring we have already put in there for you. once that is done, you can then connect your heated grip wiring to the OEM harness just like before you took it off (Take pictures before taking them off). Again, it is a much easier install if you purchase new heated grips from us. We are good either way.

Note: Police models may have to re-pin their connectors to fit our harness with the Plug & Play™ option.

PLEASE DO NOT TAKE YOUR BIKE APART UNTIL YOU RECEIVE A SHIPPING NOTIFICATION WITH TRACKING INFORMATION FROM US

.
More Information
Manufacturer Hill Country Custom Cycles
Global 1 Year
Write Your Own Review
You're reviewing:Build Your Own Custom Street Glide, Electra Glide, and Ultra Classic 2008-2013 COMPLETE Ape Hangers Handlebar DIY kit
Your Rating
DIY Handlebar Kit YouTube Channel