23% OFF

HCC COMPLETE Ape Hanger Handlebar KIT for 2014-2023 Road Glide and Road King Harley Davidson

Special Price $1,178.41 Regular Price $1,530.40
In stock
SKU
HC-125-RGRK-C-2014-2023

This package includes everything you need to put apes on your Road Glide or Road King, except for the labor and installation kit sold separately.

(FULL DESCRIPTION AT BOTTOM OF PRODUCT PAGE)

Easter Handlebar Kit Sale

23% OFF the Original Price* of ALL Handlebar Kits

CLICK FOR IMPORTANT DETAILS

Special Offer ends in
days hours min sec

HCC COMPLETE Ape Hanger Handlebar KIT for 2014-2023 Road Glide and Road King Harley Davidson Motorcycles

CORE CHARGE: If you choose NO for core charge, we will start building your kit as per our normal production schedule, however, we will not be able to complete or ship your order until your cores arrive in compliance with the policy listed below. If you choose YES, your CORE charge will be refunded when we receive your cores in compliance with the policy listed below.

In 2011 Harley changed up their controls and switches on the Softail models (2012 for Dyna's & 2014 for Touring models) to a much more complicated system design called CAN/BUS. Though it is a much better design for the consumer, it made the price of these components exponentially more expensive than the controls on previous years. Our cost on these is well over $600 per set. In order to keep our prices down like we have in the past, we developed an exchange program. Much like buying a starter at an auto parts store, we will charge you a core charge when you make the purchase, and when we receive your existing components, we refund 100% of the core charge to you. You also have the option of taking these components OFF of your bike and sending them to us for the build and you can avoid the core charge. VERY IMPORTANT: You will not receive a refund if your cores are lost during shipping and you did not require a signature upon delivery. We do not accept cores that are damaged or marred. Pack your parts carefully so they do not move during shipping. When choosing a shipping carrier and method to return your cores, YOU MUST INSURE THE PACKAGE for the amount of the core charge and REQUIRE A SIGNATURE AT DELIVERY.  Failure to comply may result in the loss of your refund. Please call or e-mail us if you have questions about this.

You will not find a more complete ape hanger package on the internet for your bike. This package includes everything you need to put apes on your Road Glide or Road King, except for the labor and the parts listed in the installation kit sold separately. We use these same parts to put apes on bikes in our shop, so we definitely know what you need to pull it off. This package will fit 2015-2023 Harley Davidson Road Glide, or Road King Special models with electronic cruise control. You will be getting a set of 1 1/4 inch 12, 14, 16, 18 and 20 inch Hill Country Custom Cycles' ape hangers with all of the stainless or black vinyl cables and brake lines to fit these apes. The handle bars are prewired with chrome switches and our patented Plug and Play® connectors are installed on the wires ready for you to plug in. Also included are chrome or black handlebar controls already assembled. Really all you have to do is mount the handlebars and change the cables. Just about anyone can do this in their garage with the help of a couple buddy's and your favorite ice cold beverage.

A new OEM Throttle by Wire or Fly by Wire sensor with one piece wiring harness is installed on all pre-wired and complete kits for 2008 and Newer Touring models.  This will eliminate having a wiring connection inside the handlebar that could cause problems.

Handlebars fit models without any modifications.

  • Will work with Hydraulic Clutch
  • Will work with Heated Grips
  • 1 1/4" Diameter high-grade steel tubing
  • Designed for early and late model HD stock 1" controls
  • Mounting section is 1" in diameter
  • Dimpled and drilled for internal wiring
  • Hand polished and beautifully chrome finished
  • Available in Chrome and Black powdercoat

NOTICE: Here at HCC, we build each handlebar kit based on your needs and specifications. This process starts once your handlebar kit is ordered and paid. Please allow 7-14 business days for your parts to arrive.

Please take a minute to understand your options for Heated Grips.

  • No, I Do Not Have Heated Grips. Choosing this option, means you do not have heated grips and have no plans to put them on anytime soon. Therefore, we make NO provisions for heated grips.
  • Yes, I want to ADD BLACK Heated Grips.($259.95) By choosing this option, we will install the BLACK OEM Harley heated grips of your choice. You must let us know the SKU or part number you want based on the heated grips available from Harley's website. We will order those grips from Harley and install them into your new bars along with all the other wiring we put in there. We run a pull cord through the bars to make this job easier for you. Please keep in mind that heated grips are NOT Plug & Play® like the rest of our wiring. During your install of the handlebars, you must connect the red wire to a power source like your battery, black wire to a ground, and if the heated grips have an orange wire (some do not), it must be connected to a power source that only turns on with the ignition switch. All this is outlined in the OEM instructions that come with the heated grips. You will find those in the box with your new handlebar kit. Still pretty darn simple.
  • Yes, I want to ADD CHROME Heated Grips.($329.95) By choosing this option, we will install the CHROME OEM Harley heated grips of your choice. You must let us know the SKU or part number you want based on the heated grips available from Harley's website. We will order those grips from Harley and install them into your new bars along with all the other wiring we put in there. We run a pull cord through the bars to make this job easier for you. Please keep in mind that heated grips are NOT Plug N Play® like the rest of our wiring. During your install of the handlebars, you must connect the red wire to a power source like your battery, black wire to a ground, and if the heated grips have an orange wire (some do not), it must be connected to a power source that only turns on with the ignition switch. All this is outlined in the OEM instructions that come with the heated grips. You will find those in the box with your new handlebar kit. Still pretty darn simple.
  • Yes, My Bike Has Heated Grips. Deciding not to purchase new grips means you must extend the wires on your heated grips using the extension wires that come in the handlebar kit. Once you extend the wires, you must pull those wires through the handlebars internally alongside the other wiring we have already put in there for you. once that is done, you can then connect your heated grip wiring to the OEM harness just like before you took it off (Take pictures before taking them off). Again, it is a much easier install if you purchase new heated grips from us. We are good either way.

NOTICE: Police models may have to re-pin their connectors to fit our harness with our Plug & Play® option.

NOTICE: If a police model is selected, we DO NOT provide Police model style controls, wiring harnesses, etc. We will provide standard controls without the police buttons.

NOTICE: Handlebar specs are based upon the handlebar height you choose for this particular kit. 

HANDLEBAR SPECS: These bars come in these heights (Listed Separately). 
Height Diameter Width Center Width Pullback Mounting Chrome Gloss Black
12 inch 1 1/4" 37" 9.5" 7.5" 1" SKU:HC-11412CT; SKU:HC-11412GBT;
14 inch 1 1/4" 37" 9.5" 7.5" 1" SKU:HC-11414CT; SKU:HC-11414GBT;
16 inch 1 1/4" 37" 9.5" 7.5" 1" SKU:HC-11416CT; SKU:HC-11416GBT;
18 inch 1 1/4" 37" 9.5" 7.5" 1" SKU:HC-11418CT; SKU:HC-11418GBT;
20 inch 1 1/4" 37" 9.5" 7.5" 1" SKU:HC-114120CT; SKU:HC-114120GBT;

NOTICE: Custom height and pullback available, call for details.

Stainless Steel Braided cables come in the correct length for your specific application. They have chrome plated ends and plastic armor coat over the stainless braid to keep from scratching your paint, and to keep the stainless looking good for a long time. They are also protective coated on the inside for extended wear.

A new OEM Throttle by Wire or Fly by Wire sensor with one piece wiring harness is installed on all pre-wired and complete kits for 2008 and Newer Touring models.  This will eliminate having a wiring connection inside the handlebar that could cause problems.

PLEASE DO NOT TAKE YOUR BIKE APART UNTIL YOU RECEIVE A SHIPPING NOTIFICATION WITH TRACKING INFORMATION FROM US

More Information
Warranty Manufacturer 1 Year Limited Warranty
Manufacturer Hill Country Custom Cycles
Write Your Own Review
You're reviewing:HCC COMPLETE Ape Hanger Handlebar KIT for 2014-2023 Road Glide and Road King Harley Davidson
Your Rating
  • Buy now, pay later without the fees with AFFIRM, the choice is yours
  • DIY Handlebar Kit YouTube Channel